VTech CS6124_-2-31 Manual - Manual (Page 15)

11
Telephone settings
Key tone
You can turn the key tone on or off.
Press MENU/
SELECT
when the handset is not in use.
Press CID or until the screen displays Settings , then
press
MENU/
SELECT.
Press CID or until the screen displays Key tone ,
then press
MENU
/SELECT .
Press CID or to choose On or Off , then press
MENU
/SELECT to confirm your selection. You hear a
confirmation tone.
Set date and time
The answering system announces the date and time of each message prior to
playing it. Before using the answering system, set the date and time as follows. If
you subscribe to caller ID service, the day, month and time are set automatically
with each incoming call. However, the year must be correct so that the day of the
week can be calculated from the caller ID information.
To change the setting:
Press MENU/
SELECT
when the handset is not in use.
Press CID or until the screen displays Settings , then
press
MENU
/SELECT .
Press CID or until the screen displays
Set date/time , then press
MENU
/SELECT .
When the month is flashing, press CID or until the
screen displays the correct month and then press
MENU
/SELECT; or, press the dialing keys ( 0-9) to enter the
current month (for example, if the month is March, you
must enter 03) .
Repeat step 4 to set the correct date and year and then press
MENU
/SELECT to advance to time setting.
When the hour is flashing, press CID or until the screen
displays the correct hour and then press
MENU
/SELECT;
or, press the dialing keys ( 0-9) to enter the current hour (for
example, if the time is two o’clock, you must enter 02) .
Repeat step 6 to set the correct minute. When AM or PM is
flashing, press CID or to select AM or PM . Press
MENU
/
SELECT to save your settings. Y ou hear a confirmation tone.
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
7.
If the date and time are not set when a message is recorded, the system
announces, “ Time and date not set,” before each message plays.
When there is a power failure or after battery replacement, the date and time need
to be reset.
•
•
Settings
Key tone
On
Settings
Set date/time
Date: 03 /25/10
Time: 02:35 PM