VTech LS6195_-13-15-16-17 Abridged manual - Manual (Page 8)

8
Speed dial
You can copy up to 9 directory entries into the speed dial locations ( 0 and 2-9) so
that you can dial these numbers using fewer keys than usual. You can only use the
handset to assign or delete speed dial entries.
To assign a speed dial entry using the handset:
Press MENU when the phone is not in use.
Scroll to Directory, then press SELECT.
Scroll to Speed dial, then press SELECT.
Scroll to a desired speed dial location, then press SELECT.
Scroll to a desired directory entry, then press SELECT to save.
To dial a speed dial entry on the handset/telephone base:
Press and hold a dialing key ( 0 or 2-9) to dial the number stored in the
corresponding location.
To delete a speed dial entry using the handset:
Press MENU when the phone is not in use.
Scroll to Directory, then press SELECT.
Scroll to Speed dial, then press SELECT.
Scroll to a desired speed dial location, then press DELETE. The handset
displays Clear SD #X? Press SELECT to confirm.
Caller ID
This product supports caller ID services provided by most telephone service
providers. Depending on your service subscription, you may see the caller’s name,
number, date and time of calls that are sent by your telephone service provider
after the first or second ring.
Caller ID log
The caller ID log stores up to 50 entries. If you answer a call before the caller ID
information displays, it will not be saved in the caller ID log.
The handset and telephone base display XX missed calls when you have
incoming calls that have not been answered.
If you want to erase the missed call indicator, press and hold
CANCEL on the
idle handset.
To review and dial a number in the caller ID log on the handset/telephone base:
Press CID on the handset or touch CID on the telephone base when the phone
is not in use.
Scroll to browse through the caller ID log. When the desired entry appears:
Press on the handset or on the telephone base repeatedly to show
different dialing options.
Press
1 repeatedly if you need to add or remove in front of the
telephone number.
Press or on the handset to dial.
-OR-
Press on the telephone base to dial.
To save a caller ID log entry to the directory using the handset:
When the desired caller ID log entry displays, press SELECT.
Use the dialing keys to modify the number, if necessary. Then press SELECT.
Use the dialing keys to modify the name, if necessary. Then press SELECT.
To delete a caller ID log entry with the handset:
When the desired caller ID log entry displays, press DELETE.
To delete all caller ID log entries with the handset:
Press MENU when the phone is not in use.
Scroll to Caller ID log and then press SELECT.
Scroll to Del all calls then press SELECT twice.
About answering system and voicemail
Your telephone has separate indicators for two different types of voice messages:
those left on the built-in answering system and those left at your telephone service
provider’s voicemail. Each alerts you to new messages differently.
If XX new messages displays on the screens, there are messages recorded
on the built-in answering system. It can record up to 99 messages, depending
on the length of each message. Each message can be up to three minutes in
length. The total recording time is approximately 4 minutes.
If and
New voicemail display on the screens, your telephone service
provider is indicating that it has new voicemail for you. Contact your telephone
service provider for more information on how to access your voicemail.
.
2.
3.
4.
5.
•
.
2.
3.
4.
•
•
.
2.
•
•
3.
.
2.
3.
•
.
2.
3.
•
•