Using the handset menu telephone settings, Using the handset menu, Telephone settings – VTech LS6195_-13-15-16-17 Abridged manual User Manual
Page 4: Telephone base overview (continued)

4
Using the handset menu
Press
MENU when the handset is not in use.
Press
or until the screen displays the desired feature menu.
Press
SELECT.
To return to the previous menu, press
CANCEL.
To return to idle mode, press and hold
CANCEL.
Telephone settings
Default settings are indicated by asterisks (*).
Menu setting
Description
Options
LCD language
Set the handset display language.
English*
Français
Español
Base LCD lang
Set the telephone base display language.
English*
Français
Español
Voicemail #
Set the speed dial voicemail number.
Voicemail #
-
Clr voicemail
Turn off the voicemail indicators (see the
note below).
Reset VM Icon?
Key tone
Set whether the handset beeps whenever a
key is pressed.
Key tone:On*
Key tone:Off
Home area code
Set the home area code so that the caller ID
log stores only seven digits for local
telephone numbers.
Home area code
_ _ _
Dial mode
Set the telephone to be touch-tone or
pulse dialing.
Touch-tone*
Pulse
Auto Answer
Set whether the handset answers a call
automatically whenever you pick it from the
telephone base when there is an incoming call.
On*
Off
Use the
Clr voicemail feature when the telephone indicates there is new voicemail
but there is none. For example, when you have accessed your voicemail while away
from home. The
Clr voicemail feature only turns off the indicators; it does not delete
your voicemail messages. As long as you have new voicemail messages, your
telephone service provider continues to send the signal that turns on the indicators.
The following are some of the telephone features you may wish to set. Refer
to
Telephone settings in the online Complete user’s manual for complete
instructions on setting all telephone features.
Handset ringer volume
You can adjust the handset ringer volume level, or turn the ringer off.
Press
MENU when the handset is not in use.
Scroll to
Ringers and then press SELECT twice.
Press or to sample each volume level, then press
SELECT to save.
When the ringer volume is set to
Off, the handset still rings when you press
/FIND HANDSET at the bottom of the telephone base.
.
2.
3.
•
•
•
.
2.
3.
•
Telephone base overview (continued)
/FIND HANDSET
Press to page the system handset.
Bottom of the telephone base