V-Tech DT16_D3AL Manual - Manual (Page 7)

5.Basic Setup Instructions
5.1 How to Enter Main Menu Page
5.2 Ring Tone Settings
1. Press MENU Button in standby mode, the date/time page will be showed. (the
date/time page will be closed in 3 munite if no operation)
2. Press MENU Button again, main menu page will be showed.
Select
setup
item on main menu page to enter setup page.There are 12 pieces ring tones
can be selected.use / Button to select last/next ring tone,it will perform
immediatelly.
Outdoor Tone :set the ring tone calling from outdoor
station.
Intercom Tone :set the ring tone calling from other
apartments.
Outdoor Tone -- 01
Intercom Tone -- 05
Monitor Time -- 1min
Advanced Set...
Auto Record -- OFF
Exit
3
2. Inner Call : If multi Monitors are installed in the same apartment, select Inner Call,
all the other Monitors will ring at the same time, whichever Monitor answers the call,
conversation is started.and the other monitors will stop ringing at the same time.(note:the
DIP switches setting of all monitors must be same. )
3. Direct Dial Guard unit : A Monitor can be assigned as Guard Unit Monitor; when the
Guard Unit Monitor answers the call, conversation with the guard person is started..