V-Tech VT27 Manual - Manual (Page 9)

► “ ” means the current operating monitor.
► “ ” means the selected calling monitor.
► Each monitor is configed one unique user
code
！
6. Intercom Function
Intercom can be initiated by any Monitor.
Touch Intercom or Inner Call item on main
menu page. Intercom function is activated
when multi monitors are installed.
Intercom: press Intercom icon on any
monitor to enter selective intercom page, see
the diagram on right.select one of user,then
press Dial Number icon to call.If the
selected monitor answers the call,intercom
talking is strating.
Inner Call: press Inner Call icon on any
monitor to enter selective intercom page, see
the diagram on right.All monitors will ring
at the same time,whichever monitor answers
the call, conversation is starting.and the
other monitors will stop ringing .
DS-1 00:23
Note:
If the system install VT-QSW module,video
quad split monitor is available,see the
diagram on right(please note that the quad
interface just display when install QSW
unit).for more detail information,please
refer to VT-QSW user manual.
-8-
1 2
User 1
Dail Number Return
User 2
User 3
User 4
User 5
Redial
Dail Number Return
User 1
User 2
User 3
User 4
User 5
Door 1 Door 2 Door 3 Door 4
Door 1
Camera 1 Camera 2 Camera 3 Quad
Door 2 Door 3 Door 4
Selective Intercom
Selective Intercom
！