V-Tech VT27 Manual - Manual (Page 8)

5. Basic Door Release Operation
1. Press the CALL button on door station.
2. The monitor rings,and the visitor's image will be seen on screen.
Note:the screen turns off after 30 seconds(default) if nobody answers.
3. Press either TALK/MON Button on monitor or touch
Talk icon on screen, you
can communicate hands free with the visitor for 90 seconds(default).After finishing
communication,press TALK/MON button or touch
Talk icon again to end the
communication. If the system connects two or more Monitors, pick up any Monitor,
the others will be automatically shut off.
Answering a Door Call
Status bar
► 1.show the current door station for monitoring.
► 2.show the waiting time for calling.
► 3.if the monitor is set to silence mode,this icon
will be shown.
► 4.if the system connect VT-RLC module which
control light,and the Staircase Light item is set
to 1or 2 (refer to part 9->Staircase Light),this
icon will be shown when receive calling.
1 2 3 4
Door Release
Entrance Monitoring
During talking state, Press UNLOCK Button or touch Unlock1 icon to release
the door for the visitor.( Note:if the system is connected VT-RLC module which control
lock, touch Unlock2 icon to release the second lock connected to RLC,for more
information,please refer to VT-RLC user manual. )
When the monitor is in standby mode, press TALK/MON Button(or touch Monitor
... item on main menu page), The screen can display the view of outside. If multi door
stations are installed, touch Select icon to get into the camera switch mode(or
directly touch Manual Monitor item on main menu page). Select door 1/2/3/4 to
monitor the door station or CCTV camera you want.See the following diagrams.
-7-
DS1 00:30