V-Tech VT27 Manual - Manual (Page 13)

9. Basic Setup Instructions
Ring Tone Settings
Touch User Setup item on main menu page to enter setup page.Select Master Call
Tone, Slaver Call Tone or Intercom Call Tone item, There are 12 pieces ring tones
can be selected.touch a ring tone you want, then touch icon to save and return last
page.but if you don't want to save the settings, touch icon to exit.
Master Call Tone :set the ring tone calling from master door station which is connected
to JS/OS1 terminal of monitor.
Slaver Call Tone :set the ring tone calling from slaver door station(Door 2/3/4).
Intercom Call Tone :set the ring tone calling from intercom call or inner call.
Ring Volume and Night Ring Volume Setting
Monitor Time Setting
You can set a ring volume for day time and
night time individually, 07:00 AM~18:00 PM
is the day time by default, but the day time
can be modified at any time by yourself(refer
to Day time setting section for more detail
information).
Touch User Setup item on main menu page
to enter setup page,select Ring Volume or
Night Ring Volume to set a appropriate
value.if you don't want to be disturbed at
night,you can set the night ring volume to 0.
Touch User Setup ->>Monitor Time. A
digital keypad will be shown on screen,
input the monitor time by touching the
digital keypad,range from 00:30 ~ 59:59. use
"cancel" key to select the setting item. After
finishing, touch "save" key to perform the
setting .(touch
icon to return last page.)
[01:30]
6
-12-