V-Tech VT596F_KP Manual - Manual (Page 9)

Input the master code.
(Default: [ ] +[#])
(red)
ON
(blue)
OFF
Beep+, Beep
(red)
ON
(blue)
ON
Beep+, Beep
(red)
ON
(blue)
ON
Beep+, Beep
(red)
ON
(blue)
ON
Beep+, Beep
(red)
ON
(blue)
ON
Beep+, Beep
(red)
ON
(blue)
OFF
Beep+
(red)
ON
(blue)
OFF
Beep+
(red)
ON
(blue)
OFF
Beep+
(red)
ON
(blue)
OFF
Beep+
Input the setting code.
Inputting of code
Input the setting code.
04+# 05+#
range:0:(open)/1:(close)
1+#
0/1
0/1 0/1
1+# 1+# 1234+#
Input the setting code.
06+#
Input the setting code.
07+#
(ex.: 1)
Inputting of code Inputting of code Inputting of code
range:0:(on)/1:(off)
(ex.: 1)
range:0:(normal)/1:(reverse)
(ex.: 1)
7.Reset code setting 8. &# function setting 6.Setting operation tone
(Default ON) (Default Normal) (Default 0(opened))
5.Setting the unlock mode *
(red)
OFF
(blue)
OFF
Beep, Beep+
- When the “ cancel” key is pressed, the LED lights off, the buzzer beeps, and the system exits the setting mode
-
When there isn’t any operation in 10s, the LED lights off, the buzzer beeps, and the system exits the setting mode
*
*
*
- The unlock mode is used to
match the type of lock,If it’s set
to 0,unlock mode is power-on-to
unlock,and must use electric lock.
If it’s set to 1,unlock mode is
power-off-to-unlock,and must use
electromagnetic lock.
- When the operation tone is
set to 0,pressing the digital
keypad will sent out a sound
of beep.
- When the operation tone is
set to 1,pressing the digital
keypad will blink one time.
- Cancel all the passwords except
the master code.
- Restore the master code to
default value(1,2,3,4)
- When the item is set to 0,press
the button to cancel the input,
and press the # button to confirm
the input.
- When the item is set to 1,press
the # button to cancel the input,
and press the button to confirm
the input .
Setting items
Step 1
Step 2
Step 3
Step 1
Step 2
Step 3
Step 1
Step 2
Step 3
Step 1
Step 2
Step 3
-8-