beautypg.com

V-Tech VT596F_KP Manual User Manual

Page 10

background image

Input the master code.
(Default: [ ]+[#] )

(red)

ON

(blue)

OFF

Beep+, Beep

(red)

ON

(blue)

ON

Beep+, Beep

(red)

ON

(blue)

ON

Beep+, Beep

(red)

ON

(blue)

ON

Beep+, Beep

(red)

ON

(blue)

OFF

Beep+

(red)

ON

(blue)

OFF

Beep+

(red)

ON

(blue)

OFF

Beep+

Inputting of code (ex.: 2011)
1~12 digits

14.Setting the code

for user

13.Setting the code

forTemporary2

Input the setting code.

Input the setting code.

12.Setting the code

forTemporary1

18+#

19+#

21+#

2011+#

Inputting of code (ex.: 1006)

1~12 digits

1006+#

Inputting of code (ex.: 2011)

1~12 digits

2011+#

Input the setting code.

(ex.:21)

20~99

- When the “ cancel” key is pressed, the LED lights off, the buzzer beeps, and the system exits the setting mode
-

When there isn’t any operation in 10s, the LED lights off, the buzzer beeps, and the system exits the setting mode

(red)

OFF

(blue)

OFF

Beep, Beep+

*

- When input the correct temporary password to release the door,

the system will clear the temporary password after 60 seconds

automatically.But you should know that the password is valid within

60 seconds after inputing the correct temporary password

- If the password length exceeds 12 digits, the system will sent out

the sound of “beep,beep,beep,beep”,and the digitals you input

before will be cleared at the same time.

- The temporary code can not be set the same as the master code

and user code.

- The user code is used to release

the lock,80 group passwords can

be supported.

- If the password length exceeds

12 digits, the system will sent out

the sound of “beep,beep,beep,beep”,

and the digitals you input before

will be cleared at the same time.

- The user code can not be set the

same as the master code and

temporary code.

10.Interference resistant

grade setting

(Default 2)

(blue)

ON

Beep+, Beep

(blue)

OFF

Beep+

Input the setting code.

09+#

Inputting of code (ex.: 3)

range:0~5

3+#

Setting items

Step 1

Step 2

Step 3

Step 1

Step 2

Step 3

Step 1

Step 2

Step 3

Step 1

Step 2

Step 3

- The larger you set the interference

resistant grade,the stronger it will be,

but the sensitivity of the keypad will

be more lower.

- The interference resistant grade

setting also will activatethe keypad

checking.

-9-