Pioneer GM-X642 - Manual (Page 9)

8
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
3. Connect the speaker wires to the
speaker terminals.
• Connect the speaker wires, passing them
through the terminal cover.
• Fix the speaker wires securely with the termi-
nal screws.
4. Push on the terminal cover.
Connecting the Speaker wires
The speaker output mode can be two-
channel (stereo) or one-channel (mono).
Connect the speaker leads to suit the mode
according to the figures shown below.
• When either the RCA input or the speaker
input is connected, RCA output becomes
functional. Do not connect both the RCA
input and the speaker input at the same time.
Two-channel mode (stereo)
One-channel mode (mono)
+ + ≠
+ ≠
≠
+ + ≠
+ +≠ ≠
≠
Speaker
terminal
Terminal cover
Terminal screw
Speaker wire
(Right)
Speaker input
(Left)
(Left)
Speaker
(Right)
(Right)
Speaker input
(Left)
Speaker
(Mono)