Velleman VM166t - Manual (Page 4)

4 www.vellemanprojects.com
Specifications - features - Transmitter instructions
I. Specifications and features
SPECIFICATIONS
power supply: 6V battery type A11 (included)
433MHz operation
R&TTE compliant ( ETS 300-220) *
dimensions: 46 x 33 x 14mm (1.8" x 1.3" x 0.5")
FEATURES
very small
bright LED
generates unique 32-bit code
LED moment and toggle mode, with auto turn off after 4.5min
more than 1,000,000,000 unique codes
code can be changed for safety purposes
LED - transmit indicator
II. Transmitter instructions
The transmitter comes with a factory set default code. For security reasons we recommend to
change this code before you learn the transmitter to a receiver.
To change the code to your own unique code:
1. Remove the battery
2. Briefly press button 3
3. Insert the battery. Mind the polarity.
4. Led 4 starts flashing slowly
5. Press and hold button 3. Led 4 will briefly flash as long as the button is held.
6. Release the button at any time.
7. Led 4 will flash 3 times to indicate that your unique code has been generated. Unit is now ready
for use.
To return to factory default code:
1. Remove the battery
2. Briefly press button 2
3. Insert the battery. Mind the polarity.
4. Led 4 starts flashing slowly
5. Briefly press button 2
6. Led 4 will flash 5 times to indicate that the unit has been reset to default code. Unit is now ready
for use.
Remarks: If you insert the battery and you do not wish to change the code:
Wait until led 5 stops flashing OR briefly press button 1
Operation of the built-in flashlight function:
Momentary mode: press and hold button button 3, led will turn on until the button is released.
Toggle mode: briefly press button 3, led will turn on. Press again to turn off.
Remark: When turned on in toggle mode, led will automatically turn off after approx. 4 minutes
to stretch battery life.