Velleman projects VMB1TC Short user manual - Manual (Page 16)

16
ENGLISH
9. Programming the controller
This controller has two ways to program heating or cooling periods
1- Normal week timer programming (see next pages)
2- Wake-up and goto-bed alarm timer feature
This unique alarm feature makes programming heating or cooling periods very easy. It is even possible to link this timer to
other modules in your Velbus system (eg. Open de blinds, power-up the radio...)
The alarm can also be turned ON or OFF in a few steps, just like any clock radio or alarm clock
How to do this:
First set the time you go to sleep and the time you want to wake up.
1. Open the “short” menu by pressing the ‘Menu’ button and select the “Alarm clock set” menu using ↑ or ↓ buttons.
2. Select the “Alarm clock set” menu using the → button. Select the “On” (or OFF to disable the alarm) setting
3. Confirm using the → button. The hour-indication flashes.
4. Set the “Wake-up time” (hour/minutes) using ↑ or ↓ and → buttons.
5. Next Set the “Go-to-bed time” (hour/minutes) using ↑ or ↓ and → buttons.
6. Confirm using the → button.
7. Exit the menu using the  button.
Next activate the wake-up and Go-to-bed timers in the program. (see next pages)
If the alarm function is active, the clock symbol is indicated on the display.
In this program example, you see that from Monday to Friday, 30 minutes (offset) before wake up
time, the temperature in the living room will be set to day preset.