English, Assign sensor names – Velleman projects VMB1TC Short user manual User Manual

Page 11

Assign sensor names

(can also be done using PC, advised)

ENGLISH

1. Press and HOLD the ‘Menu’ button until the extended menu appears.

2. Scroll through the extended menu using ↑ or ↓ buttons until the

‘Sensor settings’ menu appears.

3. Select the Sensor settings menu using the → button.

4. Scroll through the menu using the ↑ or ↓ button until the ‘Change

name’ item appears.

5. Select the change name menu using the → button. The cursor flash-

es on the first character of the name. The second line indicates the
address of the selected temperature sensor. With this address the
location of the sensor can be determined.

6. Change the character at the cursor location using ↑ or ↓ buttons and

confirm using the →

button. The cursor moves to the next character.

7. Repeat step 6 until all characters are entered.

8. Exit the menu using the 

button. Press the ‘Location’ button to

select the next sensor.

9. Repeat steps 1 through 8 until every sensor has a meaningful name.

Each sensor can have a specific label or name

(Default all the temperature sensors will have the same name ‘Temp sensor’ & address)

↑