Velleman projects VMB1TC Short user manual - Manual (Page 12)

12
8. operating the temperature controller
Select room or zone Recall and change the desired temperature
To set up a heating system for different rooms, each
room will need a temperature sensor. Multiple rooms
can be grouped together in zones* (e.g. ground floor,
second floor, bedrooms…).
Prior to setting heating (or air-conditioning) require-
ments for a certain room or zone, the desired room or
zone must be selected on the controller.
Press the ‘Location’ button repeatedly until the desired
room or zone is displayed.
Remark:
Press and hold the ‘Location’ button for easy
switching between rooms and zones.
* See extended manual how-to create zones
At any time the desired temperature for a room can be shown and/
or changed.
 Press the ↑ or ↓ button. The
desired temperature for the
selected room is flashing on
the display.
 When desired, change the
target temperature using ↑ or
↓ buttons.
Return to normal display by
pressing the
 or ← button or
simply wait for ±5 seconds
without touching any button.
Upon switching between anti-freeze, night, day or comfort
preset, the target temperature will again be replaced with
the selected preset temperature.
ENGLISH