Dram configuration, Dcts mode, Ddr3 timing items – GIGABYTE GA-MA78LMT-S2H User Manual
Page 39: Cas# latency, Ras to cas r/w delay, Row precharge time, Minimum ras active time, 1t/2t command timing, Twtr command delay, Trfc0 for dimm1
- 39 -
BIOS Setup
(Note) This item appears only if you install a CPU that supports this feature.
DRAM Configuration
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
DRAM Configuration
hi
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level
DCTs Mode
(Note)
[Unganged]
DDR3 Timing Items
[Auto]
SPD
Auto
x CAS# latency
Auto
9T
9T
x RAS to CAS R/W Delay
Auto
9T
9T
x Row Precharge Time
Auto
9T
9T
x Minimum RAS Active Time
Auto
24T
24T
x 1T/2T Command Timing
Auto
--
--
x TwTr Command Delay
Auto
5T
5T
x Trfc0 for DIMM1
Auto
105ns
105ns
x Trfc2 for DIMM2
Auto
--
--
x Write Recovery Time
Auto
10T
10T
x Precharge Time
Auto
5T
5T
x Row Cycle Time
Auto
33T
33T
x RAS to RAS Delay
Auto
4T
4T
Bank Interleaving
[Enabled]
Channel interleave
[Enabled]
DQS Training Control
[Skip DQS]
Memclock tri-stating
[Disabled]
DCTs Mode
(Note)
Allows you to set memory control mode.
Ganged
Sets memory control mode to single dual-channel.
Unganged
Sets memory control mode to two single-channel. (Default)
DDR3 Timing Items
Manual allows all DDR3 Timing items below to be configurable.
Options are: Auto (default), Manual.
CAS# latency
Options are: Auto (default), 4T~12T.
RAS to CAS R/W Delay
Options are: Auto (default), 5T~12T.
Row Precharge Time
Options are: Auto (default), 5T~12T.
Minimum RAS Active Time
Options are: Auto (default), 15T~30T.
1T/2T Command Timing
Options are: Auto (default), 1T, 2T.
TwTr Command Delay
Options are: Auto (default), 4T~7T.
Trfc0 for DIMM1
Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns.
Trfc2 for DIMM2
Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns.