RBP Chemical Technology J0157 BRUSH DAMPENER CLEANER - Manual

RBP Chemical RBP Chemical RBP Chemical RBP Chemical Technology, Inc. Technology, Inc. Technology, Inc. Technology, Inc.
150 S. 118 th Street P.O. Box 14069
Milwaukee, WI 53214-0069
www.rbpchemical.com
Corporate: 414-258-0911
Fax: 414-258-7908
RBP East: 508-865-0800
This product should be used only for its intended purpose. The information stated above is based on our laboratory tests and
experience, and is accurate to the best of our knowledge. Since actual use is beyond our control, the recommendations or
suggestions are made without warranty, expressed or implied.
Product Data Sheet Date: 03/16/12
Supersedes: 08/16/11
PRODUCT #: J0157
BRUSH DAMPENER CLEANER
Brush Dampening Cleaner
Description: Brush Dampener Cleaner is a systems cleaner designed to clean ink and
contaminants from the dampening system. This product also contains additives to
kill and control growth in the pipes, trays, and tank. Brush Dampener Cleaner is an
extremely effective cleaner for use in all types of dampening systems.
Directions for Use: Dilute Brush Dampener Cleaner at a ratio of 1 part cleaner to 10 parts water (i.e. 10
% dilution). For best results use warm water and allow to recirculate for 30 minutes.
Drain and rinse system thoroughly with warm water when completed.
Specifications:
Appearance: Clear to slight hazy liquid
Density: 9.0 lbs/gal
VOC Content:
(EPA Method 24)
2.8 lbs/gal, 336 g/L, 31%
Flash Point: >200°F