RBP Chemical Technology J5130 AQUANOL 300 - Manual

RBP Chemical Technology, Inc. RBP Chemical Technology, Inc. RBP Chemical Technology, Inc. RBP Chemical Technology, Inc.
150 S. 118 th Street P.O. Box 14069
Milwaukee, WI 53214-0069
www.rbpchemical.com
Corporate: 414-258-0911
Fax: 414-258-7908
RBP East: 508-865-0800
This product should be used only for its intended purpose. The information stated above is based on our laboratory tests and
experience, and is accurate to the best of our knowledge. Since actual use is beyond our control, the recommendations or
suggestions are made without warranty, expressed or implied.
Product Data Sheet Date: 08/03/11
Supersedes: 09/07/10
PRODUCT #: J5130
AQUANOL® 300
High Performance Alcohol Replacer
Description: A concentrated high performance alcohol replacer for use on sheetfed and small
web continuous type dampening systems. A proven industry standard, AQUANOL
300 contains wetting agents and solvents for reducing the surface tension of the
press ready solution. Compatible with all fountain solutions and additives. Used
correctly, AQUANOL 300 can reduce or completely eliminate the use of alcohol.
Directions for Use: Mix 1 to 4 ounces per gallon of AQUANOL 300 into the press ready mix. Normal
starting dosage is 2 ounces per gallon. To decrease water setting or reduce lead edge
toning, increase dosage by 1 ounce per gallon. If ink emulsification or roller stripping
occurs decrease dosage by 1 ounce per gallon. For excellent results, use with an RBP
AQUA SERIES fountain concentrate. Contact RBP technical representative for
recommendations.
Specifications:
Appearance: Clear yellow liquid
Density: 7.8 lbs/gal
VOC Content:
(EPA Method 24)
6.1 lbs/gal, 732 g/L, 78.2%
Flash Point: >210 F