RBP Chemical Technology J5096 AQUANOL ZERO User Manual
Aquanol® zero, Product data sheet, Description

RBP Chemical Technology, Inc.
RBP Chemical Technology, Inc.
RBP Chemical Technology, Inc.
RBP Chemical Technology, Inc.
150 S. 118
th
Street P.O. Box 14069
Milwaukee, WI 53214-0069
www.rbpchemical.com
Corporate: 414-258-0911
Fax: 414-258-7908
RBP East: 508-865-0800
This product should be used only for its intended purpose. The information stated above is based on our laboratory tests and
experience, and is accurate to the best of our knowledge. Since actual use is beyond our control, the recommendations or
suggestions are made without warranty, expressed or implied.
Product Data Sheet
Date: 08/03/11
Supersedes: 08/26/10
PRODUCT #: J5096
AQUANOL® ZERO
Zero VOC Alcohol Replacer
Description:
A zero VOC alcohol replacer for use on sheetfed presses. AQUANOL ZERO can
replace alcohol and/or alcohol replacers containing VOC’s on both conventional and
continuous type dampening systems. This product contains no solvents such as
glycols or glycol ethers that attack inks or rubber roller compounds.
Directions for Use:
Mix 1 to 4 ounces/gallon of AQUANOL ZERO into the press ready mix. Normal
starting dosage is 2 ounces per gallon. To decrease water setting or reduce lead edge
toning, increase dosage by 1 ounce per gallon. If ink emulsification or roller stripping
occurs decrease dosage by 1 ounce per gallon. For excellent results, use with an RBP
AQUA SERIES fountain concentrate. Contact an RBP technical representative for
recommendations.
Specifications:
Appearance:
Light amber yellowish liquid
Density:
8.5 lbs/gal
VOC Content:
(EPA Method 24)
None
Flash Point:
None