Oracle Lighting OWP-SC-401 - Manual

243 www.oraclelighting.com • tel: 1-877-375-5555 • FaX: 1-877-375-3333
ORDERinG GUiDE
SUggeSteD USe - For commercial areas requiring wider beam spread
needs. The semi-cut off feature provides some forward throw illumination
while also restricting brightness and glare at wider angles. Such as docking
areas, entrances, walkways and tunnels where light control and minimum
spill of light is required.
conStrUction - Die-cast aluminum housing with hinged door frame.
The one piece silicone gasket effectively limits outside contaminants by seal-
ing off the optical chamber. Specular anodized aluminum reflector provides
proper cutoff distribution for IES standards. hiD & hPS fixtures have
porcelain 4KV pulse rated medium base socket with nickel-plated screw
shell sockets. cFl fixtures have 4 pin plug in base & standard ballast of min.
staring Temp. of 0
o F/-18 o C, extreme Temp. ballast (XT) with -20 o F/-30 o C is
available.
FiniSh - Dark bronze corrosion- resistant polyester powder finish is
standard.
lenS - Heat and impact resistant tempered glass lens designed to reduce
glare and lamp image.
DiStriBUtion - Type IV standard. For other distribution please consult factory.
inStallation - Convenient, easy mount over standard 4” outlet box.
Top, side and back 1/2” conduit entry taps.
liStingS - UL/ C-UL for wet location.
lamP - Included except for CFL option.
All specifications are subject to change without notice.
owP-Sc-401
EXTRA lARGE SEmi CUT-OFF wall PacK
Dimensions:
example: owP-Sc-401-mh-400-mVolt
OWP-SC-401-MH-400-MVOLT
18-1/4” 13"
9"
.1 .2
.5 1 2 5
10 20
5
4
3
2.75
2
1.75
1
0
1
2
3
0 1 2 2.25 3 3.75 4 5 6 7
House
Side
Street
Side
(Distance In Units Of Mounting Height)
(Values Based On 10 Foot Mounting Height)
(1/2 Maximum Candela Trace Shown As Dashed Curve)
(+) = Maximum Candela Point
S H I P P I N G AVA I L A B L E
noteS:
1. Pulse Start standard on all fixtures above 175w.
2. lamps are not included for cFl.
3. Please consult factory for dimming options.
4. consult factory for other wattages and options.
5. 347 & 480 Volt not available on 50 & 70w fixture.
6. induction fixtures shipped with 5000k lamp standard please
contact factory for other color options.
WATTAGE vOlTAGE OPTiOnS SERiES
owP-Sc-401 (400W High Pressure Sodium)
(400W Metal Halide)
(2X26W Compact Fluorescent)
(2X32W Compact Fluorescent)
(2X42W Compact Fluorescent)
(40W Induction)
(80W Induction)
hPS-400
mh-400
cFl-2X26
cFl-2X32
cFl-2X42
inD-40-50K 6
inD-80-50K 6
OWP-SC-401
Pc120 - Photo control (120V only)
Pc277 - Photo control (277V only)
SF - Single fuse
DF - Double fuse
o-emg-750 - 750 lum. Emg. (CFL only)
Xt- -20
o F/-30 o C Min. Temp. Bal. (CFL only)
ACCESSORiES
owP-Sc-401-rl - Replacement lens kit
COlOR
BZ - BRONZE
Extr
a Lar
ge Semi Cut-Off
W
all P
ack
hPS, mh
1,4
MVOLT(120/208/240/277)
120
347
5
480
5
cFl 2,3,4
MVOLT(120/277)
120
208
240
347
inD 6
MVOLT(120/277)
Catalog Number OWP-SC-401
Project Name Type