Omnimount PAN85PRO Manual - Manual (Page 2)

DOCUMENT NO : IA‐PANA85PRO_REV.A1
INSTALLATION AND ASSEMBLY INSTRUCTIONS
ALL DIMENSIONS ‐ MM (INCH)
MODEL : PANA85PRO
MAX LOAD CAPACITY : 300 LB (136.07 KG)
NOTE : READ ENTIRE INSTRUCTION SHEET BEFORE YOU START INSTALLATION AND ASSEMBLY
WARNING
• Do not begin to install your Panasonic product until you have read and understand all instructions and
warnings contained in this Installation Sheet. If you have any questions regarding any instructions
and/or warnings please call Panasonic Customer Support.
• This product should only be installed by a qualified professional.
• Make sure that the support surface will safely support the combined load of the equipment and all
attached hardware and components.
• Never exceed the Maximum Load Capacity of this mount : 300 lbs (136.07kg)
• Always use an assistant or mechanical lifting equipment to safely lift and position equipment
• Tighten screws firmly, but do not over tighten. Over tightening can damage items, greatly reducing
their ability to hold.
Item Description Qty
A BRACKET, WALL (RIGHT) 1
B BRACKET, WALL (LEFT) 1
C BRACKET, PANEL 2
D ROD, HANGING 4
E BOLT, HANGING ROD (HF0 5/16”‐13 X 3.5) 4
F WASHER, FLAT (5/16 ID, 1 3/8 OD) 8
G NUT, HANGING ROD (5/16) 4
H SCREW, HEX HEAD LAG (3/8 X 3) 16
I STEEL WASHER3/8” 16
J WASHER, FLAT (16MM) 4
K WASHER, LOCKING (16MM) 4
L M16x50 PHCS 4
K
H
J
I
L