Ohaus RANGER COUNT 3000 COMPACT COUNTING SCALES Manual - Manual (Page 16)

EN-14
Ranger™ Count 3000
Series
Zero2
[ZErO]
Initiates a 2 nd scale zero calibration.
Span1
[SpaN]
Initiates a span calibration procedure (zero and span). A span calibration is important when
initially setting up the scale.
Span2
[SpaN2]
Initiates a 2 nd scale span calibration procedure.
Lin1 [LIN]
Initiates a linearity calibration procedure (zero, mid-point and span).
Lin2 [LIN2]
Initiates a 2 nd scale linearity calibration procedure.
GEO [GEO]
Geographical Adjustment Factor (GEO) is used to adjust the calibration based on the current
location. Settings from 0 to 31 are available with 12 being the default. Refer to table 4-2 to
determine the GEO factor that corresponds to your location.
End Cal [End]
Advance to the next menu or return to the top of the current menu.
Zero2: Perform
Span1: Perform
Span2: Perform
Linearity1: Perform
Linearity2: Perform
Geographic
Adjustment: Set 0…12…31*
End Calibration: Exit menu
*Bold always represents factory default value.