Ohaus NAVIGATOR NVT USB Interface Manual multi - Manual (Page 6)

EN-4 USB Interface
Data sent from the Interface is in standard ASCII format terminated with a [CRLF] (carriage return-
line feed). The output format is as follows:
[weight]
10 characters (right justified)
[space] 1 character
[unit] 5 characters max (left justified)
[space] 1 character
[stability indicator] 1 character “?” when unstable, blank when stable
[space] 1 character
[legend] 10 character TOTAL, hh:mm:ss(time interval), etc.
[CR] 1 character
[LF] 1 character
Output examples: (Note: * and _ indicate spaces)
*****192.21_g - Manual, Continuous or On-Stable printing
*******0.01_g_? unstable reading
*******0.01_g___ 00:00:00
- Interval Printing (example:15sec interval)
*****176.30_g_?_00:00:15 unstable reading
*****192.08_g___00:00:30
*****192.21_g
*****207.80_g_TOTAL - Accumulate Mode (Manual printing only)
USB INPUT
The balance will respond to various commands sent via the interface adapter. Terminate the
following commands when with a [CR] or [CRLF].
Scout Pro and Traveler Commands
? print current mode
0A turn Auto-print off
SA Auto-print on, prints on stability
CA Continuous
Auto-print
(n)A Auto-print on 1 to 3600 second intervals (n = 1 to 3600)
C
perform span calibration
L perform linearity calibration
0M gram mode
1M ounce mode
2M troy ounce mode
3M pennyweight
mode
4M parts counting mode
5M pound
mode
T tare balance, same as pressing ON-ZERO
V print software version
(Esc)R reset balance to factory defaults
P same as pressing PRINT
LE print last error code, i.e. [Err 0]
0S print
unstable data