Ohaus VX SERIES FLOOR SCALES Data Sheet - Manual (Page 2)

VX Series
Standard Floor Scales and Platforms
Painted tread plate platform top
for added slip resistance
Features eyebolt (not included) mounting holes on sides to allow easier lifting
and positioning
Welded steel rib and thick top plate
design provides structural stiffness
(10,000 lb model) (up to 5,000 lb model)
NEMA 4X/IP65 plastic Side-Access Junction
Box with IP67 load cells limits effect of water
on base
Ball-in-cup design feet attached to each loadcell
OHAUS VX Series Floor Scale and Platforms Standard Features:
Option
• Ramps
4’ or 5’ wide
Indicator Accessories
Description OHAUS Number
Compact Dot Matrix Impact Printer .................... 80252042
Compact Thermal Printer .................................... 80251992
Ohaus Collect Software ....................................... 80500746
TAL Software WinWedge .................................... SW12W
Paper for Printer, 80252042 (1 roll) ................... 80251932
Ribbon for Printer, 80252042 ............................. 80251933
RS232 Cable & Adapter, 80252042
Printer to T32XW ................................................ 80252574
RS232 Cable, PC 9-pin to T32XW ...................... 80500552
RS232 Cable, PC 25-pin to T32XW .................... 80500553
VX Series Floor Scales Include The Durable T32XW Indicator
T32XW Features:
• Large 1” high digit backlit LCD display quickly displays
results in a choice of lb or kg. The power-on unit is
selectable, and either the lb or kg unit can be turned off
for easier use.
• Includes Counting Mode with a minimum Average Piece
Weight of 1d, selectable sample sizes, automatic reten-
tion of last sample size used and Average Piece Weight.
For installations where Counting Mode is not required,
the parts counting software can be selected off.
• Built-in bidirectional RS232C interface for printing or
connection to PC. Printing intervals can be set to manual
(using Print key), continuous, on stable weight, or an
interval between 1 second and 60 minutes.
• Geographical gravity correction software allows quick
adjustment of calibration to local conditions without
need for recalibration of the VX Floor Scale. All VX Floor
Scales are factory calibrated and must be set to match
local gravity situation.
• Durable membrane switch keypad with dedicated Print, Tare and Function keys for quick and easy operation
• The T32XW can be wall or table mounted using the included wall mount bracket for full tilt adjustment of the indicator.
• Software lockouts of menu operations for setup, readout, mode, unit and print menu options. In NTEP certified opera-
tion, certain menu options are automatically locked-out.
Fixed location foot mounting plates
(set of two)