Naxa NT-50 - Manual (Page 12)

11
1. AUTO SEARCH
1.1 SOURCE TYPE - It is used to set the source type.
-Press up or down button to select it and then press left or right button to set.
-Options: Antenna/Cable.
1.2 START SEARCH - Before normal watching you must search effective channel first.
-Press up or down button to select it and press RIGHT button to get in scanning setup page.
-Press RIGHT navigation button to cancel the auto scan.
1.3 SNR - This option is not user adjustable.
2. CH SETUP
2.1 CHANNEL
-Press up or down button to select it and then press left or right button to change the channel
number.
2.2 SKIP
-Press up or down button to select skip item, then press left or right button to select on or off.
ON: If SKIP is ON, channel number what you select will be skipped when selecting channel
using the CH- or CH+ button.
OFF: If SKIP OFF, all the channel numbers (the channels are stored in the unit) can be
accessed using CH- or CH+ button.
Skip/unskip a channel:
1. Press up/down button to select CHANNEL item, then press left/right button to select the
channel backward/forward you want to skip.
2. Press up/down button to select the SKIP item in channel setup menu and press left/right
button to skip current channel or not.
2.3 FAVORITE LIST
-Press up or down button to select this item, then press right button to get in the favorite list
page.
-You can set maximum five favorite channels. Press up or down button to select item then
press left/right button to set the channel is your favorite channel or not.