Manhattan 460729 Webcam 500 - Manual - Manual (Page 3)

3
INSTALLATION
1. With your computer on, plug the
camera into a USB port on the
PC/notebook/netbook.
2. Use the clip on the camera base to
position the camera as desired.
NOTE: You may prefer to wait until
you are adjusting the focus ring
during the software installation so
you can view the camera image.
(See the procedures below in
Software Installation.)
3. Press the snapshot button to
capture and file still images.
(Refer to the Capture section in
Operation.)
To protect your camera:
• Avoid dropping, jostling or otherwise
mishandling it, as this can affect its
performance.
• Do not place it in extremely hot, cold or dusty environments. A soft cotton cloth
is recommended for cleaning the lens and/or any other optical components
• Prevent camera contact with sharp items (even fingernails) or coarse or wet
materials.
Base with clip
Focus
ring
Top-mount snapshot button
USB
cable