Manhattan 460545 Widescreen HD Webcam 860 Pro - Manual - Manual (Page 3)

3
HARDWARE
NOTE: Before you connect the camera to your computer or install any of its
software, un-install any other webam drivers or software programs to avoid any
conflicts that could prevent proper operation of this webcam.
1. Run the USB cable from the camera through the slot on the monitor clip. This
helps prevent the camera from
hitting your desk, keyboard or
other hard (and possibly
damaging) surface if it’s knocked
from its magnetic mount.
2. Gently position the monitor clip
in the desired location and
position. Be careful not to
scratch your screen.
3. Place the ball on the camera’s back
panel on the magnetic mount and
adjust the angle of the camera.
(Obviously, you can re-adjust the
camera as needed after you view
your initial snapshots.)
4. Plug the cable into an active USB port.
To protect your camera:
• Avoid dropping or otherwise mishandling
it, as this can affect its performance.
• Do not place it in extremely hot, cold or
dusty environments.
• Wipe with a soft cloth to clean.
Snapshot button
£
£
Video Record button
£
Built-in
microphone
£
Magnetic
mount
USB
cable
Monitor clip
£
£