Manhattan 176767 SATA 1.5 Gb_s RAID Controller PCI Card - Manual - Manual (Page 3)

InTRoDuCTIon
Thank you for purchasing this MANHATTAN ® SATA 150 RAID Controller
PCI Card, Model 176767. The easy-to-follow instructions in this manual
help make installation of the card quick and simple, so you’ll also soon
be enjoying the benefits of these features:
• Easily adds two internal SATA 150 ports, each supporting SATA 150
data transfer rates of up to 1.5 Gbps
• Provides RAID 0 (striping) and RAID 1 (mirroring)
• Low-profile form factor
• Plug and Play; hot-swappable; Windows compatible
• Lifetime Warranty
System Requirements
• Windows 2000/XP/Server 2003/Vista
• Available punch-out and PCI slots
Package Contents
• SATA 150 RAID Controller PCI Card
• Regular and low-profile brackets
• Quick install guide/user manual and driver CD
IMPORTANT: Prior to controller card installation, read the SATA
RAID manual on the enclosed CD in the folder: \SATA Raid_2Port\
SiI3x12\Win98_me_2000_xp_nt4.0\Gui. This RAID manual has more
information about RAID architecture, features, installation and settings,
plus management software for RAID GUI (graphical user interface).
After driver installation, if desired, install SATA RAID GUI for RAID
management. Before SATA RAID GUI installation, you must remove all
the existing SATA RAID GUI (or Java SATA RAID GUI) to ensure your
new SATA RAID GUI can work properly; i.e.: (\Start\Control Panel\Add
or Remove Programs\Select all SATARaid\Remove).
RAID sets can be created and managed by either the BIOS utility
setting or the SATA RAID GUI setting under Windows.