Herman Miller SAYL Chairs - Disassembly For Recycling - Manual (Page 18)

Z
© 2012 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, SAYL are among the registered trademarks of Herman Miller, Inc.
TM Sense, Setu, and Tu are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products. 18
Part no. 1b9rth rev A.
10. Place a rigid spacer
between wheels on the body
of caster and tap on it with
a rubber mallet until caster
wheel assembly comes off.
Repeat the step on other
legs to remove the remaining
3 casters.
11. Clamp on to a caster
receptacle using a vice grip
and tap vice grip using a
rubber mallet until
receptacle comes out. 12. Carefully slide fingers
between front fabric cover
and frame, pull firmly. Pull
corners first and then center.
9. Clamp on to a glide using
a vice grip and tap vice grip
using a rubber mallet until
glide comes out. Repeat the
step on other legs to remove
the remaining 3 glides.