Herman Miller Mirra Chairs - User Adjustments - Manual

HermanMiller Mirra ® Chair Adjustment Guide 1
Seating that
performs for you.
HermanMiller
Mirra
®
Chair
FlexFront ® Seat Depth: Handle under front of seat
Seat Height: Lower right side of seat
To raise:
Take your weight off chair, lift tab up.
To lower:
Lift tab up while seated.
At the proper height, your feet should rest flat on the floor.
To adjust:
Squeeze handle and adjust seat edge
up or down. Release handle to lock in
position.
In the proper position, you will have approximately three-fingers of clearance
between the back of your knees and the seat edge.
Forward Tilt: Horizontal tab on left front side of seat
Harmonic ™ Tilt Tension: Knob below right front side of seat
Only available on some models.
To increase:
Turn knob clockwise.
To decrease:
Turn knob counterclockwise.
Set the tilt tension to control the resistance you feel when reclining.
To engage:
Recline and flip lever down.
To release:
Recline and flip lever up.
Engage forward tilt to support the thighs’ declined posture when performing
intensive tasks, such as keyboarding.