Herman Miller SAYL Chairs - User Adjustments - Manual

HermanMiller SAYL ® Chair Adjustment Guide 1
Seating that
performs for you.
HermanMiller
SAYL ®
Chair
Seat Depth: Lever under left side of seat
Seat Height: Lever next to tilt tension knob, right side of chair
To raise seat:
Take your weight off chair, lift tab up.
To lower seat:
While seated, lift tab up.
At the proper height, your feet should rest flat on the floor.
To increase depth:
Pull lever out, slide thighs forward to
adjust seat; release lever.
To decrease depth:
Pull lever out, push seat back and
release lever.
In the proper position, you will have approximately three-fingers of clearance
between the back of your knees and the seat edge.
Only available on some models.
Forward Tilt: Front horizontal tab on left side of seat
Tilt Tension: Knob below right side of seat
To increase tension:
Turn knob clockwise.
To decrease tension:
Turn knob counterclockwise.
Set the tilt tension to control the resistance you feel when leaning back.
To position chair forward:
Recline and flip lever down.
To resume horizontal position:
Recline and flip lever up.
Engage forward tilt to support the thighs’ declined posture when
performing intensive tasks such as keyboarding.
Only available on some models.