EVS XEDIO Ingest Organizer Version 4.35 - August 2013 User Manual - Manual (Page 17)

• On Trigger: you can enter a start timecode and a stop timecode. The encoding
process will start and stop at the specified timecodes.
• On Time: you can enter start and stop times and dates for the encoding process. This
option is dimmed when the scheduler interface is available.
Status Area
The Server status shows if the Xedio Ingest Organizer application is connected by IP to
the corresponding Xedio Ingest Server.
The High and Low Bit rate status show if Xedio Ingest Organizer is communicating with
the encoder software for the specified encoder. Ready is displayed when the encoder is
ready for the recording. During the recording process, Rec is displayed.
The Connect button allows the user to make the connection manually if the status
currently shows a disconnection.
The Start Record button becomes active to start the encoding process as soon as the
status shows a connected state.
3.2.3. Encoder
Depending on the encoder type, a Low BitRate Encoder button and/or a High BitRate
Encoder button are available.
When you click one of the Encoder buttons for an encoder device, the following Encoder
window is displayed in the Work area, showing information about the encoder and a
monitoring output of the current encoding file.
USER MANUAL Xedio 4.35 Xedio Ingest Organizer
3. Xedio Ingest Organizer - Client 9