EVS IPDirector Version 5.8 - July 2010 Part 8 User's Manual - Manual (Page 11)

Issue 5.8.A IP Director – Version 5.8 – User’s Manual – Part 8
EVS Broadcast Equipment – July 2010
1.2.3 R
EDUNDANCY
S
TATUS IN
IPE
DIT
You can check that both Master and Slave EVS servers are correctly connected in
the Status bar of IPEdit.
The following connection status information related to the Master/Slave
redundancy can be displayed:
Displayed information On M/S Meaning
Connected to master On
Slave
server The EVS server is available and the SDTI
connection is established between the Master
and the Slave servers.
Connected to slave On
Master
server
The EVS server is available and the SDTI
connection is established between the Master
and the Slave servers.
Error: not connected to
master
On
Slave
server The Master server is not available on the
routing.
Error: not connected to
slave
On
Master
server The Slave server is not available on the
routing.
Error: No SDTI
between master and
slave
On
Slave
server No SDTI connection is established between
the Master EVS server and the Slave EVS
server.
Error: No SDTI
between slave and
master
On
Master
server
No SDTI connection is established between
the Master and Slave EVS servers.
10