EVS Xfile Version 1.02 - February 2009 User Manual - Manual (Page 42)

XFile Lite Version 1.02– User Manual
EVS Broadcast Equipment – February 2009
Issue 1.02.D
37
H
OW TO
C
OPY
/M
OVE
C
LIPS TO
O
THER
F
OLDERS
Important
Clips are linked to a MXF file. In this mode, the CUT and COPY
commands affect the MXF file even if only a clip is selected.
1. In the Folders tree view, select the folder that contains the file to be copied
or moved, i.e. the source folder.
2. Select the clips to be copied to one and single destination folder and click
the Copy button .
The clips are added to the selection and displayed in the Selection tab on a
green background.
3. Select the clips to be moved to the same destination folder and click the
Cut button .
The clips are added to the selection and displayed in the Selection tab on
an green background.
4. Select the destination folder:
• If the destination folder is a subfolder of the source folder, select the
subfolder in the folder tree.
• If the destination folder is not a subfolder of the source folder, click the
Browse button above the Folder tree view, select the folder and click OK
to open the destination folder.
5.
Select the Paste button to copy and/or move the selected clips to the
destination folder.
Note
You can remove a clip selected for move/copy by clicking the
Remove from selection button in the Selection tab or by right-
clicking the clip list and selecting Reset Selection from the menu.