Dunlop Manufacturing DCR1FC - Manual

CRYBABY
DCR-1SR RACK MODULE
DESCRIPTION
• Studio quality wah controller in a single-space rack module
• Use the effect ANYWHERE in the signal chain, with any instrument
• Input up to four foot controllers, to use from any location!
POWER
Comes complete with its own AC Adapter
CONTROLS
• Six-position switch selects frequency range assigned to the effect
• 5-band graphic equalizer allows custom tone tailoring
• Four controller inputs on one channel for multiple remote access (requires DCR-1FC foot
controller)
• Soft effect switching for quiet on/off transition
• Three continuous outputs for versatility: Wet/Dry, Wet/Buffered and a Dry output
• Volume control incorporates pre-amp boost with up to 10dB additional gain
• Support for MIDI expression pedal or voltage control device
CRYBABY
DCR-1FC RACK FOOT CONTROLLER
DESCRIPTION
• The companion foot pedal for the DCR-1SR Crybaby Rack Module
• Pedal position modulates the wah effect selected at the rack
• Use four pedals on the same channel, accessed from anywhere!
POWER
Single 9 volt alkaline battery powers LED’s ONLY. Pedal continues to operate with absent
or dead battery
CONTROLS
• Pedal sweeps the wah effect, which has been pre-assigned at the rack module
• Effect On/Bypass switch at toe-down position of pedal travel
• Tandem LED’s indicate Pedal Selected and Effect Active (simultaneously)