Dunlop Manufacturing MC403 - Manual

DUNLOP MANUFACTURING, INC. P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658 WWW.JIMDUNLOP.COM
92503008461
The MC403 Power System—a collaboration between Bob
Bradshaw and the MXR design team—is truly the ultimate power
supply. The MC403 powers more types of pedals and electronics at
one time than any previous power supply unit available. High
quality, high performance toroidal transformers ensure quiet
operation with superior performance capabilities. Designed for
maximum flexibility, the MC403 can be used on pedal boards or
rack mounted in a single rack space with the front mount bracket
(included). All multi-tap DC outputs are completely isolated, linear
regulated, and short-circuit protected to insure reliable operation.
Enclosed in a heavy-duty housing, the MC403 is built for years of
rugged road or studio use.
MC403
P O W E R
S Y S T E M
SPECIFICATIONS
INPUT
115V/230V~ 50 – 60Hz 100W, fuse 250V/1A E56092 or E221465
Use F1AL250 type fuse
OUTPUT
AC THRU – 200W MAX, hardwired to INPUT voltage
PEDAL OUTPUTS – Transformer Isolated,
Foldback Current Limited, Overvoltage Protected
QTY VOLTAGE MAX CURRENT* CONNECTOR COLOR
2 9VAC 800mA 2.5 x 5.5mm red
4 18VDC 125mA 2.1 x 5.5mm black
8 9VDC 80mA 2.1 x 5.5mm black
2 6.5-10.5VDC(out) 200mA 2.1 x 5.5mm black
10.5-15.0VDC(in)
*MAX CURRENT per output
DIMENSIONS
343 (W) x 102 (D) x 44 (H) mm
13.5 (W) x 4 (D) x 1.75 (H) inches
WEIGHT
2.63 kg / 5.8 lbs (with front panel installed)
OPERATING ENVIRONMENT
5°C to 38°C (non-condensing)
MXR ® is a registered trademark of Dunlop Manufacturing, Inc. Crybaby ® is a registered trademark of Dunlop
Manufacturing, Inc. Way Huge ® is a registered trademark of Saucy, Inc. Rotovibe ® is a registered trademark of
Dunlop Manufacturing, Inc. Univibe ® is a registered trademark of Dunlop Manufacturing, Inc. Boss ® is a
registered trademark of Roland Corporation. Electro-Harmonix ® is a registered trademark of New Sensor Corp.
Maxon ® is a registered trademark of Nisshin Onpa Co., LTD. Ibanez ® is a registered trademark of Hoshino
Gakkii Co., LTD. Radial ™ is a registered trademark of Radial Engineering Ltd. Tonebone ™ is a registered
trademark of Radial Engineering Ltd. Line 6 ® is a registered trademark of Line 6, Inc. ToneCore ® is a registered
trademark of Line 6, Inc. DigiTech ® is a registered trademark of the Harman Music Group, Ltd.
WARNING: READ THIS FIRST BEFORE OPERATING!
IMPORTANT SAFETY INSTRUCTIONS
(1) Read these instructions.
(2) Keep these instructions.
(3) Heed all warnings.
(4) Follow all instructions.
(5) Do not use this apparatus near water.
(6) Clean only with dry cloth.
(7) Do not block any ventilation openings. Install in accordance with manufacturer’s
instructions.
(8) Do not install near any heat sources such as radiators, heat registers, stoves
or other apparatus (including amplifiers) that produce heat.
(9) Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
(10) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
(11) Only use attachments, accessories, and hardware specified by the manufacturer.
(12) Unplug the unit during lightning storms or when unused for long periods of time.
(13) Refer all servicing to qualified service personnel. Servicing is required when
the unit has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled, the unit has been exposed to rain or moisture,
does not operate normally, or has been dropped.
(14) When mounting the unit, ensure that the area around the AC IN is unobstructed
so that the power cord can be easily removed.
Dunlop Manual - MC403 Power system
4/4 color Print onto Cover Stock
DUNLOP PART #: 92503008461
UPC #: N/A
FILE NAME: 92503008461-MC403_MANUAL.EPS
FILE LOCATION: CREATIVE ARCHIVE
PROJECT DIRECTOR: JIM SILVA
DESIGNER: HANK ALVA
CONTACT: [email protected]
DIMENSIONS: 4” W X 4.875” H FOLDED, 16” W X 4.875” H OPEN
PRINT MATERIAL: 100# DULL COVER
PRINTING SIDE 1: 1/C
PRINTING SIDE 2: 4/C
PROCESS COLORS: 4 COLOR PROCESS
LINE COLORS: N/A
FONTS: N/A (ALL FONTS HAVE BEEN MADE ART)
LINKED IMAGES: N/A
NOTES: SCORE AND FOLD AT CENTER AS INDICATED
APPROVED BY: JIM SILVA DATE: 03/11/09
DUNLOP MANUFACTURING, INC.
150 INDUSTRIAL WAY
P.O. BOX 846
BENICIA, CA 94510
PHONE: 707.745.2722
FAX: 707.745.2658
WARNING: The information contained in this
document is the intellectual property of
Dunlop. Any use and/or reproduction, in
whole or in part, must have the written
permission of Jim Dunlop Manufacturing, Inc.
CONCEPT
REVISED
PROOF
QUOTE
FINAL ART