Dunlop Manufacturing M109 - Manual (Page 2)

M109 6 BAND GRAPHIC EQ
DESCRIPTION
• Up to
±18dB of cutting
or boosting at six different
frequencies
• Easy to see and adjust onstage
with glow-in-the-dark graphics
and illuminated sliders
CONTROLS
SLIDERS boost or attenuate
up to ±18dB at six different
frequency centers
FOOTSWITCH toggles effect
on/bypass (illuminated red
slider LEDs indicate on)
DIRECTIONS
• Run a cable from your guitar to
the Six Band EQ’s INPUT jack
and run another cable from the
Six Band EQ’s OUTPUT jack to
your amplifier.
• Set all sliders to their 0dB
position and depress the
footswitch to turn the pedal on.
• Experiment with the Six Band
EQ’s tone-shaping capabilities
by moving the sliders up and
down to boost and cut various
frequencies to hear how this
affects the sound of your signal.
SPECIFICATIONS
Input Impedance
470 kΩ
Output Impedance 5 kΩ
Max Input Level 0 dBV
Max Output Level 0 dBV
Noise Floor* -95 dBV
Bypass Hardwire
Current Draw 3 mA
Power Supply 9 volts DC
*A-weighted
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658
POWER
The MXR Six Band EQ is powered
by one 9-volt battery (remove
bottom plate to install), a 9-volt
AC adapter such as the Dunlop
ECB003/ECB003E, or a DC Brick
™
power supply.