Dunlop Manufacturing M115 - Manual (Page 2)

SAMPLE SETTINGS
M115 DISTORTION III
SMOOTH OVERDRIVE SINGING SUSTAIN CRUNCHY RHYTHM
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658
POWER
The MXR Distortion III is powered
by one 9-volt battery (remove
bottom plate to install), a 9-volt
AC adapter such as the Dunlop
ECB003/ECB003E, or a DC Brick
™
power supply .
DESCRIPTION
• Dynamic, touch-sensitive
response
• Proprietary circuit design
delivers rich harmonics
• Large output range
• True bypass
DIRECTIONS
• Run a cable from your guitar
to the Distortion III’s INPUT jack
and run another cable from the
Distortion III’s OUTPUT jack to
your amplifier.
• Start with all controls
at 12 o’clock.
• Turn the effect on by depressing
the footswitch.
• Rotate the DISTORTION knob
clockwise to increase amount
of distortion or counterclockwise
to decrease it.
• Rotate the TONE knob
clockwise for a brighter
sound or counterclockwise
for a darker sound.
• Rotate the OUTPUT knob
clockwise to increase
overall effect volume or
counterclockwise to
decrease it.
SPECIFICATIONS
Input Impedance
1 MΩ
Output Impedance* 5.5 kΩ
Nominal Intput Level -22 dBV
Maximum Output Level +3 dBV
Noise Floor** 84 dBV
Tone Control ±6.5 dB at 3 kHz
Distortion Gain 22 dB to 50 dB, 1 kHz
Bypass
True Hardwire
Current Draw 3.5 mA
Power Supply 9 Volts DC
* Output control at mid position
** A-weighted, Distortion and Tone controls
at mid position Output control at maximum
clockwise position
CONTROLS
OUTPUT knob controls overall
effect volume
TONE knob controls the color
of the overdrive signal
DISTORTION knob controls
amount of distortion
FOOTSWITCH toggles
effect on/bypass (red LED
indicates on)