beautypg.com

M78 custom badass ’78 distortion – Dunlop Manufacturing M78 User Manual

Page 2

background image

SAMPLE SETTINGS

M78 CUSTOM BADASS ’78 DISTORTION

DESCRIPTION
• A hot-rodded classic circuit
• Roars with huge amp stack tones

and old school distortion

• Delivers soaring leads and rich,

saturated rhythms

• CRUNCH button boosts the

dynamic range and harmonic
content of distortion

CONTROLS

CRUNCH button increases

dynamic range of distortion

TONE knob controls the color

of distorted signal

OUTPUT knob controls the

volume of the effect

DISTORTION knob controls the

amount of distortion

Footswitch toggles effect on/

bypass (red LED indicates on)

DIRECTIONS
• Run a cable from your guitar

to the ’78 Distortion’s INPUT jack
and run another cable from the
’78 Distortion’s OUTPUT jack to
your amplifier.

• Set all controls to the 12

o’clock position

• Turn the effect on by depressing

the footswitch.

• Rotating the DISTORTION knob

clockwise increases the amount
of distortion while rotating it
counterclockwise decreases it.

SPECIFICATIONS
Input Impedance

1 MΩ

Output Impedance

6 kΩ

Nominal Input Level

-22 dBV

Max Output Level

Crunch Off

-5 dBV

Crunch On

-2 dBV

Noise Floor*

-84 dBV

Distortion Range 27 dB at 500 Hz
Max System Gain

43 dB

Tone Control
Tilt EQ

± 4 dB at 100 Hz

± 5 dB at 2 kHz

Bypass

True Hardwire

Current Draw

LEDs Off

2.5 mA

LEDs On

6 mA

Power Supply

9 volts DC

*Gain & tone controls at mid position, output control

at full clockwise position, A-weighted

• Rotate the TONE knob clockwise

for a brighter sound; rotate the
Tone knob counterclockwise for
a darker sound.

• Rotating the OUTPUT knob

clockwise raises the volume
of the effect while rotating
it counterclockwise lowers
the volume.

• Engage CRUNCH button (blue

LED lit) to boost the dynamic
range and harmonic content
of distortion.

DIS-RUPTION

’70

S

HARD ROCk

SMELLS LIKE
FLANNEL ANGST

’90

S

ALTERNATIVE

APPETITE FOR

DISTORTION

’80

S

GLAM METAL

POWER

The MXR Custom Badass ’78 is
powered by one 9-volt battery
(remove bottom plate to install),
a 9-volt AC adapter such as the
Dunlop ECB003/ECB003E, or a
DC Brick

power supply.

DUNLOP MANUFACTURING, INC.

P.O. BOX 846 BENICIA, CA 94510 U.S.A.

TEL: 1-707-745-2722 FAX: 1-707-745-2658