Dunlop Manufacturing FFM1 - Manual (Page 2)

FFM1 MINI FUZZ FACE
CONTROLS
VOLUME knob controls overall
effect volume
FUZZ knob controls amount
of fuzz
FOOTSWITCH toggles on/
bypass (Blue LED indicates on)
DIRECTIONS
• Run a cable from your guitar
to the Fuzz Face’s Input jack
and another cable from the
Face Face’s Output jack to
your amplifier.
• Start with both controls at 12
o’clock.
• Turn the effect on by depressing
the footswitch.
• Rotate the VOLUME knob
clockwise to increase
overall effect volume or
counterclockwise to decrease it.
• Rotate the FUZZ knob clockwise
to increase amount of fuzz or
counterclockwise to decrease it.
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658
®
DESCRIPTION
• Legendary Fuzz Face tone with
pedalboard-friendly size, AC
power and on/bypass status LED
• Spec’d from our own prized 1970
Fuzz Face
• Bright, aggressive sounding
BC108 transistors
• True Bypass
POWER
The FFM1 Fuzz Face is powered
by one 9 volt battery (open
battery door on underside of
pedal to install), a 9 volt AC
Adapter such as the Dunlop
ECB003/ECB003EU or a power
supply such as the DC Brick™.
SPECIFICATIONS
Input Impedance
10 kΩ
Output Impedance
Max Volume <16 kΩ
Mid Volume 66 kΩ
Max Gain 55 dB
Bypass True Hardwire
Current Draw 3.4 mA
Power Supply 9 volts DC
SCORE/FOLD SCORE/FOLD SHORT TRIM
92503014289revA_FFM1_man.indd 4-6 1/9/13 2:20 PM