Dunlop manual - csp-028 vintage dyna comp – Dunlop Manufacturing CSP028 User Manual
Page 2
SPECIFICATIONS
Maximum Input Level.........................-5 dBV
Maximum Output Level...................... -12 dBV
Input Impedance................................. 1 M
Ω
Output Impedance.............................. 10 k
Ω
Equivalent Input Noise....................... -95 dBV
T.H.D...................................................... 0.2% Typ. at -20 dBV, 1kHz
Maximum Compression..................... 36 dB
Attack Time.......................................... 5 ms
Release Time....................................... 1 s
Current Draw....................................... 1.6 mA at 9VDC
HEAVY SQUISH
COUNTRY PICKIN’
POWER
The MXR CUSTOM SHOP ‘76 VINTAGE DYNA COMP can be powered by one 9-volt
battery accessed through the bottom of the pedal.
DIRECTIONS
To begin using your MXR CUSTOM SHOP ‘76 VINTAGE DYNA COMP:
A) Run a cable from your guitar to the Vintage Dyna Comp’s Input jack and another
cable from the Output jack to your amplifier.
B) Rotate the Output knob to its 2 o’clock position and the Sensitivity knob fully
counter-clockwise to off.
C) Turn the effect on by depressing the footswitch.
D) Adjust the Output control until the output level is at the same level when the effect
is engaged or bypassed.
E) Adjust the Sensitivity control until the desired amount of compression is attained.
SAMPLE SETTINGS
Check out the sample settings below to hear some of the many great sounds the
Vintage Dyna Comp is capable of.
3
2
1
1
2
3
OUTPUT knob regulates overall
effect rate (inactive in bypass
mode)
SENSITIVITY knob regulates overall
effect rate (inactive in bypass
mode)
FOOTSWITCH toggles effect
on/bypass
CONTROLS
Dunlop Manual - CSP-028 Vintage dyna comp
4/4 color Print onto Cover Stock
DUNLOP PART #:
92503007170 REVB
UPC #:
N/A
FILE NAME:
92503007170REVB-CSP028_MANUAL.EPS
FILE LOCATION:
CREATIVE ARCHIVE
PROJECT DIRECTOR:
JIM SILVA
DESIGNER:
HANK ALVA
CONTACT:
DIMENSIONS:
4” W X 4.875” H FOLDED, 8” W X 4.875” H OPEN
PRINT MATERIAL:
100# DULL COVER
PRINTING SIDE 1:
4/C
PRINTING SIDE 2:
4/C
PROCESS COLORS:
C=100 M=100 Y=100 K=100
LINE COLORS:
N/A
FONTS:
N/A (ALL FONTS HAVE BEEN MADE ART)
LINKED IMAGES:
N/A
NOTES:
SCORE AND FOLD AT CENTER AS INDICATED
APPROVED BY:
JIM SILVA
DATE: 10/29/08
DUNLOP MANUFACTURING, INC.
150 INDUSTRIAL WAY
P.O. BOX 846
BENICIA, CA 94510
PHONE: 707.745.2722
FAX: 707.745.2658
WARNING: The information contained in this
document is the intellectual property of
Dunlop. Any use and/or reproduction, in
whole or in part, must have the written
permission of Jim Dunlop Manufacturing, Inc.
CONCEPT
REVISED
PROOF
QUOTE
FINAL ART