Dunlop Manufacturing JH2 - Manual (Page 2)

DIRECTIONS
• Run a shielded instrument cable from
your guitar to the JH2’s Instrument jack.
• Run another shielded instrument cable
from the JH2’s Amplifier jack into your
amplifier’s input.
•Turn on the amplifier and begin playing.
• To turn the pedal on/off, push the toe of
the pedal down until you feel a “click.”
• By rocking your foot back and forth on
the pedal, you can change the effect
that the JH2 Cry Baby has on the tone
of your instrument instantaneously.
SPECIFICATIONS
Filter Parameters
Low Pass 290Hz - 310Hz
High Pass 1400Hz –1510Hz
Input Impedance 800kΩ
Output Impedance 10kΩ
Max Input 8.0dB
Max Output +10dB
Max Gain (Toe Down) +16.5dB @
1400Hz ~ 1510Hz
Max Gain (Heel Down) +16.5dB @
290Hz ~310Hz
Power Requirements 900µA
DESCRIPTION
• The original ‘60s wah with Jimi’s
custom modifications
• Vintage-style construction and
premium electronics
• Lower frequency range provides
fatter, open sound
• Features limited edition tread with art
from legendary rock artist John Van
Hamersveld and a gloss black finish
POWER
The JH2 Jimi Hendrix 70th Anniversary
Tribute Series Cry Baby can be powered
by one 9 volt battery (accessed via the
bottom of the pedal), a Dunlop ECB003
AC adapter (ECB003E in Europe) or a
DC Brick ™ series power supply. .
92503013526revA_JH2_man.indd 3-4 9/14/12 3:58 PM