Dunlop Manufacturing M133 - Manual (Page 2)

M133 MICRO AMP
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658
CONTROLS
GAIN knob controls overall
amount of signal boost
FOOTSWITCH toggles effect on/
bypass (red LED indicates on)
POWER
The MXR Micro Amp is powered by
one 9-volt battery (remove bottom
plate to install), a 9-volt AC adapter
such as the Dunlop ECB003/
ECB003E or a power supply
such as the DC Brick
™ .
DESCRIPTION
• Up to +26dB of gain
• Perfect for switching between
guitars with unmatched output
• Great for use with long signal
chains, or anytime signal drop-off
is a problem
DIRECTIONS
• Run a cable from your guitar
to the Micro Amp’s INPUT jack
and run another cable from the
Micro Amp’s OUTPUT jack to
your amplifier.
• Start with the control at
12 o’clock.
• Turn the effect on by depressing
the footswitch.
• Rotate the GAIN knob clockwise
to increase amount of signal
boost or counterclockwise to
decrease it.
SPECIFICATIONS
Input Impedance
1 MΩ
Output Impedance 470 Ω
Maximum Output Level +6 dBV
Noise Floor* -80 dBV
Gain Control +0.5 dB to +26 dB
Freq. Response 20 Hz to 20 kHz,
+0 dB, -1.4 dB
Bypass Hardwire
Current Draw 2.5 mA
Power Supply 9 volts DC
*A-weighted, Gain control at maximum
clockwise position