Dunlop Manufacturing DVP1 - Manual (Page 2)

DESCRIPTION
• Create thick, luscious volume
swells and control your volume
levels with exacting precision
• Pat. Pending Dunlop Steel Band
Drive works with a frictionless
action that is highly reliable and
requires no maintenance
• Fully adjustable torque clutch
customizes the rocker tension
for absolute control
DIRECTIONS
• Run a cable from your guitar to
the Dunlop Volume Pedal’s Input
jack and run another cable from
the Volume Pedal’s Output jack to
your amplifier. It is recommended
that the Dunlop Volume Pedal
be placed first in the effects
signal chain.
• With the pedal in full toe-down
position, set your guitar and
amp's maximum desired
volume level.
• Move the rocker pedal toward the
heel-down position to decrease
the volume.
• The output signal will be muted
when the rocker pedal reaches
full heel-down position.
DVP1 VOLUME PEDAL
POWER
The Dunlop Volume Pedal is a
passive unit and does not require
any power source to operate.
CONTROLS
• Rocker pedal in full toe-down
position for maximum output
volume
• Rocker pedal in full heel-down
position for no output signal
• Signal from Tuner Output is active
at all rocker pedal positions
ADjuSTABLE TORquE
The Dunlop Volume Pedal features
an adjustable torque clutch that
allows the user to control the ten-
sion of the rocker pedal. To adjust
the rocker pedal torque, place the
pedal in toe-down position. Insert
a #1 flathead screwdriver into the
torque adjust screw located under
the heel end of the rocker pedal.
Turn clockwise to increase resis-
tance, and turn counterclockwise
to decrease resistance.
SPECIFICATIONS
Passive Volume Control
Input
¼" Mono Jack
Output ¼" Mono Jack
Tuner Output ¼" Mono Jack
(Hardwire From Input to Tuner Jack)
Input Impedance
250KΩ
Output Impedance: Pedal position
and source impedance dependent
Pedal at full Heel position
< 5Ω
Pedal at full Toe position 250KΩ
in parallel with source impedance
DuNLOP MANuFACTuRING, INC | P.O. BOX 846 BENICIA, CA 94510 u.S.A. | 1-707-745-2722
SCORE/FOLD INSIDE SPREAD INSIDE SPREAD
92203009686_DVP1_MANUAL_REVA.indd 3-4 3/26/10 10:58 AM