Dell UPS 1000T - Manual (Page 12)

8 | Installation and Startup
Connecting the Power Cord
10 Verify that the power input to the UPS has adequate upstream overcurrent protection:
Table 1. Minimum Upstream Circuit Breaker Rating
UPS Output Power 120V 208V 230V
500W 15A — 15A
1000W 15A — 15A
1500W (at 100V)
1920W 20A — 15A
11 Plug the UPS power cord into a power outlet.
NOTE: For 1920/1500W models. There are two power cords in the box, one with BSMI and PSE certified
markings that can be used in Taiwan and Japan, another cord is for regions other than Taiwan and Japan.