Vitek VT-1260 - Manual (Page 7)

7
ENGLISH
Important information
• Vertical steaming is not recommended for
synthetic fabrics.
• To avoid melting the fabric, do not touch the
iron soleplate to the item while steaming.
• Never steam iron clothes on a person as the
steam temperature is very high and it can
cause burns. Use a coat-hanger or a stand.
STEAM CHAMBER CLEANING
To prolong lifetime of the iron we recommend
cleaning the steam chamber, especially in the
regions with “hard” water.
• Fill the water tank (10) with water.
• Put the iron on the base (8).
• Insert the power plug into the socket.
• Set the constant steam supply control (3) to
the “ ” position (steam supply is off).
• Set the temperature control (7) to the “MAX”
temperature of the iron soleplate, the indicator
in the temperature control (7) will light up.
• When the soleplate temperature (5) reaches
the desired temperature value, the indicator
will go out, you can start cleaning.
• Switch off the unit, by setting the temperature
control (7) to the “MIN” position.
• Unplug the unit.
• Hold the iron above the sink horizontally; set
and hold the control to the position (pic 8).
• Boiling water together with scale will be throw-
ing out from the openings in the iron soleplate
(5).
• Slightly sway the iron back and forth, until wa-
ter goes out of the water tank.
• Place the iron on the base (8) and let it cool
down completely.
• Set the constant steam supply control (3) to
the “ ” position (steam supply is off).
• When the soleplate (5) cools down completely,
wipe it with a dry cloth.
• Before you take the iron for storing, make sure
that there is no water in the water tank and that
the iron soleplate (5) is completely dry.
CLEAN AND CARE
• Before cleaning the iron, make sure that it is
turned off and has cooled completely.
• Wipe the iron's outer surface with a damp cloth
to dry.
• Sediment on the iron soleplate can be removed
with a cloth soaked in vinegar-water solution.
• After removing sediment, polish the soleplate
with a dry cloth.
• Do not use abrasive substances to clean the
soleplate and body of the iron.
• Avoid touching the iron soleplate with sharp
metal objects.
STORAGE
• Turn the temperature control (7) anticlockwise
till the “MIN” position.
• Unplug the unit.
• Set the iron vertically and allow it to cool com-
pletely.
• Set the constant steam supply control (3) to
the “ ” position (steam supply is off).
• Open the filling opening lid (9), turn over the
unit and drain the remaining water (10). Close
the lid (9) (pic.9).
• Store the iron vertically in a dry cool place out
of reach of children.
Delivery set
Iron – 1 pc.
TECHNICAL CHARACTERISTICS
Power supply: 220-240 V ~ 50 Hz
Maximal power consumption: 2200 W
Specifications subject to change without prior
notice.
Service life of appliance - 3 years
GUARANTEE
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the
Council Directive 89/336/EEC and
to the Low Voltage Regulation (73/23
EEC)
1260.indd 7 1260.indd 7 24.08.2010 10:02:31 24.08.2010 10:02:31