beautypg.com

Dell UPS 1000T User Manual

Page 7

background image

5

Installation

|

Removing the Battery Connector Cover

NOTE:

A small amount of arcing may occur when connecting an EBM to the UPS. This is normal and will not

harm personnel. Insert the EBM cable into the UPS battery connector quickly and firmly.

NOTE:

If the UPS is stored or used without an EBM, the battery connector cover must be installed as a safety

precaution.

2

Remove the battery connector cover from the rear panel. Retain the cover and screws.

Installing the Strain Relief Bracket

See also other documents in the category Dell Computer hardware: