Dell PowerEdge C1100 - Manual (Page 26)

26 Using the Baseboard Management Controller
www
.del
l.
com |
su
ppo
rt.
d
e
ll.
co
m Table 1-30 shows the BMC commands.
Table 1-30. BMC Device and Messaging Commands
Commands NetFn CMD O/M Supported
Set BMC Global Enables App 2Eh M Yes
Get BMC Global Enables App 2Fh M Yes
Clear Message Buffer Flags App 30h M Yes
Get Message Buffer Flags App 31h M Yes
Enable Message Channel
Receive
App 32h O Yes
Get Message App 33h M Yes
Send Message App 34h M Yes
Read Event Message Buffer App 35h O Yes
Get BT Interface Capabilities App 36h M No
Get System GUID App 37h M Yes
Get Channel Authentication
Capabilities
App 38h M Yes
Get Session Challenge App 39h M Yes
Activate Session Command App 3Ah M Yes
Set Session Privilege Level
Command
App 3Bh M Yes
Close Session App 3Ch M Yes
Get Session Information App 3Dh M Yes
Get Authentication Code
Command
App 3Fh O Yes
Set Channel Access Commands App 40h M Yes
Get Channel Access Commands App 41h M Yes
Get Channel Info Command App 42h M Yes
Set User Access Commands App 43h M Yes
Get User Access Commands App 44h M Yes
Set User Name Commands App 45h M Yes
Get User Name Commands App 46h M Yes
Set User Password Commands App 47h M Yes
Active Payload Command App 48h M Yes