Dell Latitude D630c - Manual

Dell™ Latitude™ D630c System
Board
Configuring Your Dell Latitude D630c Computer
After you install a new system board, you must configure the system board
with the appropriate management mode for your computer. Follow these
instructions carefully to ensure that your computer is configured for the
correct management mode.
NOTICE:
You must enter the correct management mode; otherwise, your computer
may not function properly and the new system board may have to be replaced.
1 Locate the label that is attached to the inside of the battery bay. To remove
the battery see "Replacing the Battery" in your User’s Guide.
The label inside the battery bay will appear as one of the following:
label
September 2007