Bosch PLS 300 - Manual (Page 14)

14 | English
1 609 929 W68 | (21.6.11) Bosch Power Tools
f Use the saw station only for cutting the materials listed
under Intended Use. Marble or granite as well as tiles with
a rough surface structure and natural stone tiles cannot be
cut.
Product Description and Specifica-
tions
Intended Use
PLS 300: Together with the power tool, the sawing station is
intended for sawing straight lengthway and crossway cuts in
boards and profiles of hardwood and softwood, as well as alu-
minium and plastic.
Horizontal mitre angles from a maximum of –45° to +45° as
well as bevel angles from a maximum of 0° to 45° can be set.
The sawing station is intended for operation exclusively with
jigsaws from the Bosch PST DIY program.
f
Only use the saw blades recommended by Bosch (see
page 129). When using saw blades that are too thin, dan-
ger is given that the cut runs out of centre.
PLS 300 Set, PTC 1: Together with the tile cutter, the sawing
station is intended for cutting ceramic and nonvitreous tiles to
a maximum thickness of 10 mm.
Horizontal mitre angles from a maximum of –45° to +45° can
be set.
Product Features
The numbering of the product features refers to the illustra-
tion of the sawing station on the graphics pages.
PLS 300
1 Base unit
2 Scale for mitre angle (horizontal)
3 Locking knob for height adjustment
4 Guide rail with sawing slot
5 Side stops of the guide rail
6 Support extension
7 Additional support
8 Bridge
9 End stop for bevel cuts
10 Locking lever of the guide rail
11 Alignment mark
12 Locking knob for various mitre angles
13 Mitre angle indicator
PTC 1*
14 Tile cutter
15 Stop with scale
16 Break-off cones
* only in combination with PLS 300
Technical Data
f Only use the saw blades recommended by Bosch (see
page 129). When using saw blades that are too thin, dan-
ger is given that the cut runs out of centre.
Sawing station PLS 300 PLS 300 Set
(PLS 300 + PTC 1)
Article number 3 603 M04 0.. 3 603 M04 1..
Sawing
– Max. cutting length for crossway cuts (90°)
– Max. cutting height
– Mitre/Bevel Angle
Horizontal
Vertical
mm
mm
°
°
315
25
± 45
± 45
315
25
± 45
± 45
Cutting tiles
– Max. cutting length for crossway cuts (90°)
– Max. cutting height
– Mitre/Bevel Angle
Horizontal
mm
mm
°
–
–
–
340
10
± 45
Weight according to EPTA-Procedure 01/2003 kg 3.4 3.4 + 0.2
Dimension of suitable saw blades
Max. overall length mm 100
Max. toothed length mm 76
OBJ_BUCH-1219-002.book Page 14 Tuesday, June 21, 2011 2:15 PM