Bosch GHP 8-15 XD Professional - Manual (Page 10)

10 | English
F 016 L72 357 | (17.8.12) Bosch Power Tools
f High pressure may cause objects to rebound. If necessary
wear suitable personnel protective equipment such as
safety goggles.
f Vehicle tyres/tyre valves may only be cleaned from a mini-
mum distance of 30 cm, otherwise the vehicle tyre/tyre
valve could be damaged by the high-pressure jet. The first
indication of this is a discoloration of the tyre. Damaged
vehicle tyres/tyre valves can be extremely dangerous.
f Materials containing asbestos and other materials which
contain substances which are hazardous to your health
must not be sprayed.
f Detergents must not be used undiluted. The products are
safe to use as they contain no acids, alkalis or substances
which are detrimental to the environment. We recommend
that the detergents are kept out of the reach of children. If
detergent comes into contact with the eyes, wash immedi-
ately with plenty of water and if swallowed contact a doctor
immediately.
f Never use the pressure washer without the filter, a
dirty filter or a damaged filter. Using the pressure wash-
er without/damaged filter may invalidate the warranty.
f If necessary wear personal protective equipment (PPE)
e. g. safety goggles, breathing protection etc to protect
against water, particles and/or aerosols sprayed back from
parts.
f Metal parts may become hot after prolonged usage, if nec-
essary wear protective gloves.
f Avoid high pressure washing in bad weather conditions es-
pecially when there is a risk of lightening.
Operation
f The operator must use the unit in accordance with the reg-
ulations. He/she must take local conditions into account
and be aware of other people, especially children, when
operating the unit.
f The unit may only be used by authorised persons who have
received training or have demonstrated their ability to op-
erate the unit. The unit must not be operated by children or
juveniles (danger of accidents due to incorrect use of the
unit). Children should be supervised to ensure that they do
not play with the appliance.
f The unit is not intended for use by persons (including chil-
dren) with reduced physical, sensory or mental capabili-
ties, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use
of the unit by a person responsible for their safety.
f The unit must never be left unsupervised while the unit is
switched on.
f The water jet from the high-pressure nozzle produces a re-
coil on the gun. You should therefore hold the gun and
spray lance firmly with both hands.
Transport
f Switch off the motor and secure the unit before transport-
ing.
Maintenance
f Switch off the unit prior to all cleaning and maintenance
work and before replacing components. Pull out the mains
plug if the unit is mains-operated.
f Repairs may only be carried out by authorised Bosch Serv-
ice Centres.
Accessories and spare parts
f Only use accessories and spare parts which have been ap-
proved by Bosch. Original accessories and spare parts
guarantee that the unit can be operated safely and without
any breakdowns.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
Intended Use
The product is intended for cleaning areas and objects out-
side the house, tools, vehicles and boats, if the appropriate
accessories such as cleaning agents approved by Bosch are
used.
Intended use is related to operation within 0°C and 40°C am-
bient temperature.
Technical Data
Symbol Meaning
Movement direction
Weight
On
Off
Lo Low pressure
Hi High pressure
Accessories
Pressure washer GHP 8-15 XD
Article number 3 600 J10 3..
Rated power kW 4
Supply Temperature max. °C 50
Supply rate min. l/min 12.6
Rated pressure MPa 15
Max. operating pressure MPa 16
Starting cycles generate brief voltage drops. Interference with other
equipment/machines may occur in case of unfavourable mains system
conditions. Malfunctions are not to be expected for system impedances
below 0,153 ohm.
OBJ_BUCH-1763-001.book Page 10 Friday, August 17, 2012 8:49 AM